Industrial ISO Certification Coal Gas Generator
|FOB Price:||US $131,765 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $131,765/ Piece|
|Production Capacity:||100 Piece/Pieces / Month|
|Payment Terms:||L/C, T/T|
- Model NO.: LN500-GF
- Gas Source: Coal Gas
- Power: 500kw
- Model Number (Engine Type): Ln500-GF
- Rated Power: 500kw
- Rated Frequency: 50/60Hz
- Phase: AC 3-Phase, 4 Wire
- Stroke: 210mm
- Trademark: lvneng
- Specification: ISO
- HS Code: 8502200000
- Output Type: AC Three Phase
- Certification: CE, ISO
- Standard: Standard
- Brand Name: Lvneng
- Rated Speed: 1000/1200rpm
- Rated Voltage: 400V/230V
- Cylinder Bore: 190mm
- Cooling Method: Water Cooler
- Transport Package: Plastic Packag
- Origin: Shandong Jinan
2016 Power Plant Coal gas generator set from China LN500-GF
The producing method of coke oven gas is as below mentioned: raw coal id crushed and washed and washed, after that different coal will be mixed together with different ratio and put into furnace, and then it will produce coal gas and coal tar with high temperature pyrolysis in air-free condition.
Requirements for coal gas generator set(Within 1m from gas intake value)
- Coal gas temperature≤40ºCPressure 3 ~ 20kpa,Pressure changing rates≤1 kpa/minH2S≤200mg/Nm3;NH3≤20mg/Nm3;Tar content≤50mg/Nm3;Impurity Particle size≤5μm, impurity content ≤30mg/Nm3Moisture content≤40g/Nm3Gas heat value≥4.2MJ/ Nm3;
If fuel gas contains higher quantity of sulfur and ammonia, it not only corrodes the pole of spark plug serioudly, but also increases the acid value, which corrodes internal parts of generator set and corrodes the generator set with precipitates.
The coal gas must be purified before burning in engine
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. If the CH4 covers less than 30%, the total content of CH4 and O2 should not less than 28%, the content of O2 should not less than 16%.
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
8. Heat Value of coal gas: ≥ 4.2Mj/ Nm3
|Parameter of Coal gas generator set|
|Model Number (Engine Type)||LN-500GF|
|Phase||AC 3-Phase, 4 wire|
|Voltage Stable time||≤1s|
|Engine Capacity||32 L|
|Starting System||DC 24V electric motor|
|Cooling method||water cooler|
|Lubricant method||Passive and flying lubricant|
|Power Factor||0.8 lagging|
|Certificates||ISO 9001:2008, CE|
|Warranty||1 year or 1000 running hours which arrives first|
|Control system||Automatic alarm system|
Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification,keep good quality.
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvneng technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvneng technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.