ISO, Ce Approved Coal Gas Gasifier Generator Hot Sale
|FOB Price:||US $60,000-100,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $60,000-100,000/ Piece|
|Production Capacity:||100 Piece/Pieces / Month|
|Payment Terms:||L/C, T/T|
- Model NO.: LNM-800GF
- Certification: ISO
- Standard: Standard
- Brand Name: Lvneng
- Rated Speed: 1000/1200rpm
- Rated Voltage: 400V/230V
- Cylinder Bore: 190mm
- Cooling Method: Water Cooler
- Transport Package: Plastic Packag
- Origin: Shandong Jinan
- Gas Source: Methane Gas
- Power: 500kw
- Model Number (Engine Type): Ln-500gfj
- Prime Power/Standby Power: 400kw/500kw
- Rated Frequency: 50/60Hz
- Phase: AC 3-Phase, 4 Wire
- Stroke: 210mm
- Trademark: lvneng
- Specification: ISO
- HS Code: 8502200000
2015 Power Plant Coal gas generator set from China LN-500GFL
Welcome to the showroom of Jinan Lvneng Power Machinery Equipment Co., Ltd!
We are professional and dedicated system supplier of energy production by diesel and gas powered generator set, we are basically a manufacturer of generator set for various kinds of fuel such as diesel, natural gas, biogas, biomass gas, coal gas, coal bed gas(CBM), associated gas and syngas.
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required.
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. If the CH4 covers less than 30%, the total content of CH4 and O2 should not less than 28%, the content of O2 should not less than 16%.
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
8. Heat Value of coal gas: ≥ 4.2Mj/ Nm3
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvneng technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvneng technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification,keep good quality.
Parameter of 2015 Power Plant Coal gas generator set from China LN-500GFL
Parameter of Coal gas generator set
|Model Number (Engine Type)||LN-500GFL|
|Prime Power/Standby Power||400KW/500KW|
|Phase||AC 3-Phase, 4 wire|
|Voltage Stable time||≤1s|
|Engine Capacity||32 L|
|Starting System||DC 24V electric motor|
|Cooling method||water cooler|
|Lubricant method||Passive and flying lubricant|
|Power Factor||0.8 lagging|
|Certificates||ISO 9001:2008, CE|
|Warranty||1 year or 1000 running hours which arrives first|
|Control system||Automatic alarm system|